RabbitMQ 修改默认端口_aresblank_rabbitmq管理页面端口

irpas 02-07 6598

一、配置环境变量

下载 erlang 和 rabbitMq

ERLANG_HOME D:\erl8.2 path添加%ERLANG_HOME%\bin; cmd下用erl -version检测是否配置成功

RabbitMQ Server安装包下载:http://·/download.html

配置环境变量 RABBIT_HOME D:\RabbitServer\rabbitmq_server-3.6.6 path添加%RABBIT_HOME%\sbin;

cmd下进入RabbitMQ Server目录下的sbin目录，用rabbitmqctl status检测RabbitMQ是否配置成功

二、rabbitmq管理界面开启

1、官方提供的一个web管理工具（rabbitmq_management） ????????????? http://·/management.html 2、安装了Rabbitmq后，默认也安装了该管理工具，执行命令即可启动 ??????????? rabbitmq-plugins enable rabbitmq_management（先定位到rabbitmq安装目录） ? ?????????? ? 3、启动后，直接在浏览器地址输入： http://localhost:15672/?? 账号密码都是：guest???? ； 4、如果无法在web页打开管理界面，则继续按照以下方式操作：

使用管理员打开cmd执行此命令：net stop RabbitMQ && net start RabbitMQ

5、重新打开http://localhost:15672/ ，你会发现管理页面出来了。 ?

三、修改端口

有两个目录，一个是安装目录，还有一个是输出目录，在输出目录的下面新建一个 rabbitmq.config文件即可。ps：我的版本是3.9.11

C:\Program Files\RabbitMQ Server\rabbitmq_server-3.9.11\etc\rabbitmq??? 安装目录

C:\Users\Administrator\AppData\Roaming\RabbitMQ?????????????????????????????????? 输出目录

[{ rabbit, [{ tcp_listeners, [{"0.0.0.0",5672}] }] }, { rabbitmq_management, [{ listener, [ {port,15672}, {ip,"0.0.0.0"}, {ssl,false} ] }] }].

?其次，修改了配置文件后，

? rabbitmq-service stop

? rabbitmq-service remove

? rabbitmq-service install

? rabbitmq-service start

5. . 如果config有问题，服务是启动不起来的，而且错误信息也是很难发现的,我最先就是那个端口后面那个逗号没有去掉,结果启动出错,又不知道错误原因,很难排查。

?附：配置文件（这个太多，直接用上面的就行）

%% -*- mode: erlang -*- %% ---------------------------------------------------------------------------- %% RabbitMQ Sample Configuration File. %% %% See http://·/configure.html for details. %% ---------------------------------------------------------------------------- [ {rabbit, [%% %% Network Connectivity %% ==================== %% %% By default, RabbitMQ will listen on all interfaces, using %% the standard (reserved) AMQP port. %% %% {tcp_listeners, [5672]}, %% To listen on a specific interface, provide a tuple of {IpAddress, Port}. %% For example, to listen only on localhost for both IPv4 and IPv6: %% %% {tcp_listeners, [{"127.0.0.1", 5672}, %% {"::1", 5672}]}, %% SSL listeners are configured in the same fashion as TCP listeners, %% including the option to control the choice of interface. %% %% {ssl_listeners, [5671]}, %% Number of Erlang processes that will accept connections for the TCP %% and SSL listeners. %% %% {num_tcp_acceptors, 10}, %% {num_ssl_acceptors, 1}, %% Maximum time for AMQP 0-8/0-9/0-9-1 handshake (after socket connection %% and SSL handshake), in milliseconds. %% %% {handshake_timeout, 10000}, %% Log levels (currently just used for connection logging). %% One of 'debug', 'info', 'warning', 'error' or 'none', in decreasing %% order of verbosity. Defaults to 'info'. %% {log_levels, [{connection, error}, {channel, error}]} %% Set to 'true' to perform reverse DNS lookups when accepting a %% connection. Hostnames will then be shown instead of IP addresses %% in rabbitmqctl and the management plugin. %% %% {reverse_dns_lookups, true}, %% %% Security / AAA %% ============== %% %% The default "guest" user is only permitted to access the server %% via a loopback interface (e.g. localhost). %% {loopback_users, [<<"guest">>]}, %% %% Uncomment the following line if you want to allow access to the %% guest user from anywhere on the network. %% {loopback_users, []}, %% Configuring SSL. %% See http://·/ssl.html for full documentation. %% %% {ssl_options, [{cacertfile, "/path/to/testca/cacert.pem"}, %% {certfile, "/path/to/server/cert.pem"}, %% {keyfile, "/path/to/server/key.pem"}, %% {verify, verify_peer}, %% {fail_if_no_peer_cert, false}]}, %% Choose the available SASL mechanism(s) to expose. %% The two default (built in) mechanisms are 'PLAIN' and %% 'AMQPLAIN'. Additional mechanisms can be added via %% plugins. %% %% See http://·/authentication.html for more details. %% %% {auth_mechanisms, ['PLAIN', 'AMQPLAIN']}, %% Select an authentication database to use. RabbitMQ comes bundled %% with a built-in auth-database, based on mnesia. %% %% {auth_backends, [rabbit_auth_backend_internal]}, %% Configurations supporting the rabbitmq_auth_mechanism_ssl and %% rabbitmq_auth_backend_ldap plugins. %% %% NB: These options require that the relevant plugin is enabled. %% See http://·/plugins.html for further details. %% The RabbitMQ-auth-mechanism-ssl plugin makes it possible to %% authenticate a user based on the client's SSL certificate. %% %% To use auth-mechanism-ssl, add to or replace the auth_mechanisms %% list with the entry 'EXTERNAL'. %% %% {auth_mechanisms, ['EXTERNAL']}, %% The rabbitmq_auth_backend_ldap plugin allows the broker to %% perform authentication and authorisation by deferring to an %% external LDAP server. %% %% For more information about configuring the LDAP backend, see %% http://·/ldap.html. %% %% Enable the LDAP auth backend by adding to or replacing the %% auth_backends entry: %% %% {auth_backends, [rabbit_auth_backend_ldap]}, %% This pertains to both the rabbitmq_auth_mechanism_ssl plugin and %% STOMP ssl_cert_login configurations. See the rabbitmq_stomp %% configuration section later in this file and the README in %% https://github.com/rabbitmq/rabbitmq-auth-mechanism-ssl for further %% details. %% %% To use the SSL cert's CN instead of its DN as the username %% %% {ssl_cert_login_from, common_name}, %% SSL handshake timeout, in milliseconds. %% %% {ssl_handshake_timeout, 5000}, %% Password hashing implementation. Will only affect newly %% created users. To recalculate hash for an existing user %% it's necessary to update her password. %% %% {password_hashing_module, rabbit_password_hashing_sha256}, %% Configuration entry encryption. %% See http://·/configure.html#configuration-encryption %% %% To specify the passphrase in the configuration file: %% %% {config_entry_decoder, [{passphrase, <<"mypassphrase">>}]} %% %% To specify the passphrase in an external file: %% %% {config_entry_decoder, [{passphrase, {file, "/path/to/passphrase/file"}}]} %% %% To make the broker request the passphrase when it starts: %% %% {config_entry_decoder, [{passphrase, prompt}]} %% %% To change encryption settings: %% %% {config_entry_decoder, [{cipher, aes_cbc256}, %% {hash, sha512}, %% {iterations, 1000}]} %% %% Default User / VHost %% ==================== %% %% On first start RabbitMQ will create a vhost and a user. These %% config items control what gets created. See %% http://·/access-control.html for further %% information about vhosts and access control. %% %% {default_vhost, <<"/">>}, %% {default_user, <<"guest">>}, %% {default_pass, <<"guest">>}, %% {default_permissions, [<<".*">>, <<".*">>, <<".*">>]}, %% Tags for default user %% %% For more details about tags, see the documentation for the %% Management Plugin at http://·/management.html. %% %% {default_user_tags, [administrator]}, %% %% Additional network and protocol related configuration %% ===================================================== %% %% Set the default AMQP heartbeat delay (in seconds). %% %% {heartbeat, 60}, %% Set the max permissible size of an AMQP frame (in bytes). %% %% {frame_max, 131072}, %% Set the max frame size the server will accept before connection %% tuning occurs %% %% {initial_frame_max, 4096}, %% Set the max permissible number of channels per connection. %% 0 means "no limit". %% %% {channel_max, 128}, %% Customising Socket Options. %% %% See (http://·/memory.html for full details. %% Memory-based Flow Control threshold. %% %% {vm_memory_high_watermark, 0.4}, %% Alternatively, we can set a limit (in bytes) of RAM used by the node. %% %% {vm_memory_high_watermark, {absolute, 1073741824}}, %% %% Or you can set absolute value using memory units. %% %% {vm_memory_high_watermark, {absolute, "1024M"}}, %% %% Supported units suffixes: %% %% k, kiB: kibibytes (2^10 bytes) %% M, MiB: mebibytes (2^20) %% G, GiB: gibibytes (2^30) %% kB: kilobytes (10^3) %% MB: megabytes (10^6) %% GB: gigabytes (10^9) %% Fraction of the high watermark limit at which queues start to %% page message out to disc in order to free up memory. %% %% Values greater than 0.9 can be dangerous and should be used carefully. %% %% {vm_memory_high_watermark_paging_ratio, 0.5}, %% Interval (in milliseconds) at which we perform the check of the memory %% levels against the watermarks. %% %% {memory_monitor_interval, 2500}, %% Set disk free limit (in bytes). Once free disk space reaches this %% lower bound, a disk alarm will be set - see the documentation %% listed above for more details. %% %% {disk_free_limit, 50000000}, %% %% Or you can set it using memory units (same as in vm_memory_high_watermark) %% {disk_free_limit, "50MB"}, %% {disk_free_limit, "50000kB"}, %% {disk_free_limit, "2GB"}, %% Alternatively, we can set a limit relative to total available RAM. %% %% Values lower than 1.0 can be dangerous and should be used carefully. %% {disk_free_limit, {mem_relative, 2.0}}, %% %% Misc/Advanced Options %% ===================== %% %% NB: Change these only if you understand what you are doing! %% %% To announce custom properties to clients on connection: %% %% {server_properties, []}, %% How to respond to cluster partitions. %% See http://·/partitions.html for further details. %% %% {cluster_partition_handling, ignore}, %% Make clustering happen *automatically* at startup - only applied %% to nodes that have just been reset or started for the first time. %% See http://·/clustering.html#auto-config for %% further details. %% %% {cluster_nodes, {['rabbit@my.host.com'], disc}}, %% Interval (in milliseconds) at which we send keepalive messages %% to other cluster members. Note that this is not the same thing %% as net_ticktime; missed keepalive messages will not cause nodes %% to be considered down. %% %% {cluster_keepalive_interval, 10000}, %% Set (internal) statistics collection granularity. %% %% {collect_statistics, none}, %% Statistics collection interval (in milliseconds). %% %% {collect_statistics_interval, 5000}, %% Explicitly enable/disable hipe compilation. %% %% {hipe_compile, true}, %% Timeout used when waiting for Mnesia tables in a cluster to %% become available. %% %% {mnesia_table_loading_timeout, 30000}, %% Size in bytes below which to embed messages in the queue index. See %% http://·/persistence-conf.html %% %% {queue_index_embed_msgs_below, 4096} ]}, %% ---------------------------------------------------------------------------- %% Advanced Erlang Networking/Clustering Options. %% %% See http://·/clustering.html for details %% ---------------------------------------------------------------------------- {kernel, [%% Sets the net_kernel tick time. %% Please see http://erlang.org/doc/man/kernel_app.html and %% http://·/nettick.html for further details. %% %% {net_ticktime, 60} ]}, %% ---------------------------------------------------------------------------- %% RabbitMQ Management Plugin %% %% See http://·/management.html for details %% ---------------------------------------------------------------------------- {rabbitmq_management, [%% Pre-Load schema definitions from the following JSON file. See %% http://·/management.html#load-definitions %% %% {load_definitions, "/path/to/schema.json"}, %% Log all requests to the management HTTP API to a file. %% %% {http_log_dir, "/path/to/access.log"}, %% Change the port on which the HTTP listener listens, %% specifying an interface for the web server to bind to. %% Also set the listener to use SSL and provide SSL options. %% {listener, [{port, 9080} %% {ip, "127.0.0.1"}, %% {ssl, true}, %% {ssl_opts, [{cacertfile, "/path/to/cacert.pem"}, %% {certfile, "/path/to/cert.pem"}, %% {keyfile, "/path/to/key.pem"}]}]}, %% One of 'basic', 'detailed' or 'none'. See %% http://·/management.html#fine-stats for more details. %% {rates_mode, basic}, %% Configure how long aggregated data (such as message rates and queue %% lengths) is retained. Please read the plugin's documentation in %% http://·/management.html#configuration for more %% details. %% %% {sample_retention_policies, %% [{global, [{60, 5}, {3600, 60}, {86400, 1200}]}, %% {basic, [{60, 5}, {3600, 60}]}, %% {detailed, [{10, 5}]}]} ]}, %% ---------------------------------------------------------------------------- %% RabbitMQ Shovel Plugin %% %% See http://·/shovel.html for details %% ---------------------------------------------------------------------------- {rabbitmq_shovel, [{shovels, [%% A named shovel worker. %% {my_first_shovel, %% [ %% List the source broker(s) from which to consume. %% %% {sources, %% [%% URI(s) and pre-declarations for all source broker(s). %% {brokers, ["amqp://user:password@host.domain/my_vhost"]}, %% {declarations, []} %% ]}, %% List the destination broker(s) to publish to. %% {destinations, %% [%% A singular version of the 'brokers' element. %% {broker, "amqp://"}, %% {declarations, []} %% ]}, %% Name of the queue to shovel messages from. %% %% {queue, <<"your-queue-name-goes-here">>}, %% Optional prefetch count. %% %% {prefetch_count, 10}, %% when to acknowledge messages: %% - no_ack: never (auto) %% - on_publish: after each message is republished %% - on_confirm: when the destination broker confirms receipt %% %% {ack_mode, on_confirm}, %% Overwrite fields of the outbound basic.publish. %% %% {publish_fields, [{exchange, <<"my_exchange">>}, %% {routing_key, <<"from_shovel">>}]}, %% Static list of basic.properties to set on re-publication. %% %% {publish_properties, [{delivery_mode, 2}]}, %% The number of seconds to wait before attempting to %% reconnect in the event of a connection failure. %% %% {reconnect_delay, 2.5} %% ]} %% End of my_first_shovel ]} %% Rather than specifying some values per-shovel, you can specify %% them for all shovels here. %% %% {defaults, [{prefetch_count, 0}, %% {ack_mode, on_confirm}, %% {publish_fields, []}, %% {publish_properties, [{delivery_mode, 2}]}, %% {reconnect_delay, 2.5}]} ]}, %% ---------------------------------------------------------------------------- %% RabbitMQ Stomp Adapter %% %% See http://·/stomp.html for details %% ---------------------------------------------------------------------------- {rabbitmq_stomp, [%% Network Configuration - the format is generally the same as for the broker %% Listen only on localhost (ipv4 & ipv6) on a specific port. %% {tcp_listeners, [{"127.0.0.1", 61613}, %% {"::1", 61613}]}, %% Listen for SSL connections on a specific port. %% {ssl_listeners, [61614]}, %% Number of Erlang processes that will accept connections for the TCP %% and SSL listeners. %% %% {num_tcp_acceptors, 10}, %% {num_ssl_acceptors, 1}, %% Additional SSL options %% Extract a name from the client's certificate when using SSL. %% %% {ssl_cert_login, true}, %% Set a default user name and password. This is used as the default login %% whenever a CONNECT frame omits the login and passcode headers. %% %% Please note that setting this will allow clients to connect without %% authenticating! %% %% {default_user, [{login, "guest"}, %% {passcode, "guest"}]}, %% If a default user is configured, or you have configured use SSL client %% certificate based authentication, you can choose to allow clients to %% omit the CONNECT frame entirely. If set to true, the client is %% automatically connected as the default user or user supplied in the %% SSL certificate whenever the first frame sent on a session is not a %% CONNECT frame. %% %% {implicit_connect, true} ]}, %% ---------------------------------------------------------------------------- %% RabbitMQ MQTT Adapter %% %% See https://github.com/rabbitmq/rabbitmq-mqtt/blob/stable/README.md %% for details %% ---------------------------------------------------------------------------- {rabbitmq_mqtt, [%% Set the default user name and password. Will be used as the default login %% if a connecting client provides no other login details. %% %% Please note that setting this will allow clients to connect without %% authenticating! %% %% {default_user, <<"guest">>}, %% {default_pass, <<"guest">>}, %% Enable anonymous access. If this is set to false, clients MUST provide %% login information in order to connect. See the default_user/default_pass %% configuration elements for managing logins without authentication. %% %% {allow_anonymous, true}, %% If you have multiple chosts, specify the one to which the %% adapter connects. %% %% {vhost, <<"/">>}, %% Specify the exchange to which messages from MQTT clients are published. %% %% {exchange, <<"amq.topic">>}, %% Specify TTL (time to live) to control the lifetime of non-clean sessions. %% %% {subscription_ttl, 1800000}, %% Set the prefetch count (governing the maximum number of unacknowledged %% messages that will be delivered). %% %% {prefetch, 10}, %% TCP/SSL Configuration (as per the broker configuration). %% %% {tcp_listeners, [1883]}, %% {ssl_listeners, []}, %% Number of Erlang processes that will accept connections for the TCP %% and SSL listeners. %% %% {num_tcp_acceptors, 10}, %% {num_ssl_acceptors, 1}, %% TCP/Socket options (as per the broker configuration). %% %% {tcp_listen_options, [{backlog, 128}, %% {nodelay, true}]} ]}, %% ---------------------------------------------------------------------------- %% RabbitMQ AMQP 1.0 Support %% %% See https://github.com/rabbitmq/rabbitmq-amqp1.0/blob/stable/README.md %% for details %% ---------------------------------------------------------------------------- {rabbitmq_amqp1_0, [%% Connections that are not authenticated with SASL will connect as this %% account. See the README for more information. %% %% Please note that setting this will allow clients to connect without %% authenticating! %% %% {default_user, "guest"}, %% Enable protocol strict mode. See the README for more information. %% %% {protocol_strict_mode, false} ]}, %% ---------------------------------------------------------------------------- %% RabbitMQ LDAP Plugin %% %% See http://·/ldap.html for details. %% %% ---------------------------------------------------------------------------- {rabbitmq_auth_backend_ldap, [%% %% Connecting to the LDAP server(s) %% ================================ %% %% Specify servers to bind to. You *must* set this in order for the plugin %% to work properly. %% %% {servers, ["your-server-name-goes-here"]}, %% Connect to the LDAP server using SSL %% %% {use_ssl, false}, %% Specify the LDAP port to connect to %% %% {port, 389}, %% LDAP connection timeout, in milliseconds or 'infinity' %% %% {timeout, infinity}, %% Enable logging of LDAP queries. %% One of %% - false (no logging is performed) %% - true (verbose logging of the logic used by the plugin) %% - network (as true, but additionally logs LDAP network traffic) %% %% Defaults to false. %% %% {log, false}, %% %% Authentication %% ============== %% %% Pattern to convert the username given through AMQP to a DN before %% binding %% %% {user_dn_pattern, "cn=${username},ou=People,dc=example,dc=com"}, %% Alternatively, you can convert a username to a Distinguished %% Name via an LDAP lookup after binding. See the documentation for %% full details. %% When converting a username to a dn via a lookup, set these to %% the name of the attribute that represents the user name, and the %% base DN for the lookup query. %% %% {dn_lookup_attribute, "userPrincipalName"}, %% {dn_lookup_base, "DC=gopivotal,DC=com"}, %% Controls how to bind for authorisation queries and also to %% retrieve the details of users logging in without presenting a %% password (e.g., SASL EXTERNAL). %% One of %% - as_user (to bind as the authenticated user - requires a password) %% - anon (to bind anonymously) %% - {UserDN, Password} (to bind with a specified user name and password) %% %% Defaults to 'as_user'. %% %% {other_bind, as_user}, %% %% Authorisation %% ============= %% %% The LDAP plugin can perform a variety of queries against your %% LDAP server to determine questions of authorisation. See %% http://·/ldap.html#authorisation for more %% information. %% Set the query to use when determining vhost access %% %% {vhost_access_query, {in_group, %% "ou=${vhost}-users,ou=vhosts,dc=example,dc=com"}}, %% Set the query to use when determining resource (e.g., queue) access %% %% {resource_access_query, {constant, true}}, %% Set queries to determine which tags a user has %% %% {tag_queries, []} ]} ].